Newton TRL6 in-line (ball type) fuel tank vent valve AN-6/AN-6 (0.66l/sec)
The two-ball In-Line valves (TRL 6/7/8/68/88) are designed primariy for motor sport applications, in environments where they will be subjected to violent movement.
The TRL series are designed to be installed in-line, connected to the fuel tank via a suitable hose. They need to be installed in a vertical position.
- Sealing to the tank is by an O-ring
The two-ball valves are open to atmosphere so vapour can collect inside the vehicle. All installations should be piped to the outside of the vehicle or connected to a charcoal canister. The best way for tarmac vehicles is to run the pipe to the top of the body and then down to a point just below the base of the tank. The valve should be positioned as close as possible to the rear of the tank so that under braking the fuel load will move towards the front of the tank and away from the valve.
Specifications
- Outside Diameter: 22.00 mm
- Middle Body Length: 39.60 mm
- Overall Length: 71.60 mm
- Thread 9/16" x 18 UNF / Jic 6 (AN-6)
- Standpipe Not Applicable
- Internal Thread 9/16" x 18 UNF
- Weight 35.0g
- Materials Aluminium Alloy 6082
- Finish Anodised Red
- Flow Capacity 0.66 litre/second
